Bear Crux Review

December 16, 2014 By Jon E. Silks

Bear Archery has a history of bringing strong contenders to the market in the value-to-performance bow class. These rigs may not have all the same bells and whistles as their flagship counterparts, but they do have many of the core technologies and demonstrate high performance relative to their price tags. The Crux is Bear Archery's best bang for your buck heavy hitter for 2015.

The Crux is built with its Max Preload Quad limbs, Hybrid A-Cam system, aluminum reflex riser, Offset String Suppressor and much more.

Grade 'A' Hybrid

Bear's A-Cam is a hybrid system, which means it uses two elliptical-shaped cams, a control cable, a split harness power cable and an evenly placed string. The even string distribution is important, as it reduces the effects of mechanical string seating and string stretch. The top cam in this system is often called the control cam, and it has two tracks that are home to the string and control cable. The bottom cam, or power cam, is designed with three tracks, which are used by the string, control and power cables.

The control cable links the two cams together so they rotate in unison. As one cam lets cable out, the other takes it in. Most of the load in the hybrid design is handled by the power cable as it is taken in by the power cam and exerts a load on the top axle through the split harness, which gives a wide base for stability. It is commonly believed the hybrid system requires less hassle to maintain, suffers fewer synchronization and timing issues and produces straighter, more level nock travel.

A single rotating module on each cam offers the full range of adjustability from 26-30€‰1„2 inches, in half-inch increments. No bow press is needed to customize the draw length. Be sure to move the draw stop into the corresponding hole when making these changes. Cams ride on a hardened axle and sealed bearings and generate a system letoff of 70 percent.

Loaded to the Max

Bear's Max Preload Quad Limbs reach a past-parallel position while at full draw, capturing the inherent benefits of this configuration, such as reduced shock, vibration and noise. Individual limbs are made with machined Gordon Composites materials and matched into sets of four through the deflection values they register when flexed. Their high strength-to-weight ratio allows them to bend further and store more energy. Limbs are available in 50-, 60- and 70-pound peak weight options.

Limbs are aligned to the centerline of the riser through Bear's Zero Tolerance 2-piece pocket. The cap and pivot components cradle each limb section for precise positioning at this critical interface. Any misalignment in this area will result in a bow that is difficult, if not impossible, to tune correctly and general inaccuracy. Limb pockets pivot during the draw-weight adjustment process, which allows the limb-to-pocket alignment to remain consistent.

Cast Platform

The Crux riser is first cast with aluminum and then CNC machined into its final form. It has a moderate reflex configuration, which with all else being equal allows Bear to increase the power stroke and speed as a result. A casting process is used for the first manufacturing step followed by a CNC machining process that finishes it into its final form.

A set of slender panels are set into shallow pockets on both side of the contoured handle area to complete the grip. Each panel is made of injection-molded plastic, which includes the Bear name, and is over-molded with rubber for comfort.

It's launch day 2025 for Mathews and Editor-In-Chief Christian Berg gives you a first look at the brand new LIFT X. The new flagship model builds on last year's top-selling LIFT platform. Available in two versions — the LIFT X 29.5 and LIFT X 33 — both incorporate a trio of new features. They include Limb Shift Technology, ARC7 Limb Technology and BOND grips, and Berg touches on each of them in this video.

Bowhunting

Think Differently When Hanging Treestands

Bowhunting

Think Differently When Hanging Treestands

How often do we consider the wind when hanging our treestands? Almost always! That's a good strategy, except for the fact that we're not hunting the wind — we're hunting deer. With the benefit of Ozonics, it gives us the opportunity to think about where we need to be in order to best hunt our target bucks, even if that means we're not in the perfect place for a particular wind.

Bowhunting

Hunting the Right Way

Bowhunting

Hunting the Right Way

The right stand, on the right day, with the right wind — that's when success tends to occur. But what if you only have a few select days to hunt because of work, family activities, life events, etc. and the wind is all wrong? That's where Ozonics can come into play. Bowhunters can do more than good if they hunt certain stand sets in the wrong wind. An Ozonics unit, however, is just what the doctor ordered to continue hunting the “right way” — even at the wrong time!

Bowhunting

How to Hunt Small Acreage All Season

Bowhunting

How to Hunt Small Acreage All Season

When it comes to hunting small properties, our success can be boiled down to how much pressure we put on it. And most of the pressure, Cole Tanner explains, is the scent that we produce — and leave behind — in the field. While we're constantly trying to pattern deer, these odors actually allow the deer to pattern us. On smaller properties, our margin of error is razor-thin, so we need to adjust our strategy accordingly.

Gear

Do Animals Smell Ozone?

Gear

Do Animals Smell Ozone?

Ozonics' Cole Tanner tackles one of the most frequently asked questions the company receives. His in-depth answer is that while animals can indeed smell ozone, there's a very limited opportunity to do so. In our experience, even if deer do recognize that something is a bit different, they simple won't see it as a threat. Our entire staff has trusted Ozonics on our hunts for many years, and we can't begin to tell you how many swirling wind situations their units have guided us through.

Bowhunting

Baseball & Bowhunting with Ben McDonald

Bowhunting

Baseball & Bowhunting with Ben McDonald

Sr. Digital Editor Drew Pellman talks bowhunting — and a little bit of baseball — with Ben McDonald, the No. 1 overall pick in the 1989 Major League Baseball draft by the Baltimore Orioles. McDonald, who is a diehard bowhunter, currently serves as a color commentator for the Orioles on MASN. Inside the hunting community, he has a longstanding relationship with Realtree and has enjoyed many hunts with Bill Jordan and family for many years.

Gear

30 Years of TenPoint Crossbows!

Gear

30 Years of TenPoint Crossbows!

TenPoint Crossbows reached a significant milestone recently — 30 years in business! With over one million crossbows shipped since 1994, TenPoint has always been at the forefront of crossbow innovation, and the company shows no signs of altering that path anytime soon.

Gear

APX — The Newest Pattern From Realtree

Gear

APX — The Newest Pattern From Realtree

Jim McGinn, VP of Marketing at Realtree, shows off the latest camouflage pattern from this industry giant. The new APX pattern is an all-purpose pattern that will help you blend into your surroundings whether you're in a treestand hunting whitetails, or bellycrawling your way into range of a mule deer out West. It took years to develop APX, a pattern that met the strict standards of Realtree Founder, Bill Jordan, and it will meet your standards as well.

Gear

Buck Commander Releases New Buk Ops Technology

Gear

Buck Commander Releases New Buk Ops Technology

Ryan Busbice from Buck Commander introduces a brand-new technology they call Buk Ops. This is an optical viewing device that does not use infra-red or thermal technology. It maximizes available light to give the user an enhanced view of their surroundings. It's not a targeting device either, but a tool for scanning fields in low light, or even walking into your stand or blind without a flashlight. This is one-of-a-kind technology that holds many uses for all types of hunters.

Gear

Easton's Sonic 6.0 a Versatile Arrow Shaft

Gear

Easton's Sonic 6.0 a Versatile Arrow Shaft

Bowhunter TV Host, Curt Wells, talks to Easton Marketing Director, Gary Cornum, about the Sonic 6.0, a highly versatile arrow shaft that gives the bowhunter multiple options. Wells explains how he's able to convert his Sonic 6.0 arrows to different weights based on the species of big game he's hunting.

Gear

Easton Introduces the Match Grade Pro Series Arrow

Gear

Easton Introduces the Match Grade Pro Series Arrow

Gary Cornum, Marketing Director at Easton, explains to Bowhunter TV Host, Curt Wells, the virtues of Easton's newly released Match Grade Pro Series Arrows. From front to back, Easton has built their latest technologies into these arrows, which are only available from Easton dealers. Everything from high-end inserts and vanes combine with a five-point straightness standard to make the Pro Series arrows the best a bowhunter can buy. It's no longer necessary to build-your-own to achieve the highest quality arrow you demand.

Gear

Primos Double Bull Delivers New Raised Hunting Ground Blind

Gear

Primos Double Bull Delivers New Raised Hunting Ground Blind

On the surface, it would seem almost impossible to keep improving the Double Bull ground blinds manufactured by Primos. But as Raised Hunting founder and television show host David Holder explained to OSG's Lynn Burkhead, this year's new Raised Hunting Double Bull blind raises the standard of ground blind excellence even higher, whether you're chasing elk, mule deer or pronghorn antelope out west in Montana or big record book whitetails living in the Midwestern whitetail paradise of Iowa.